Hand-built rubber Firefighting boot.
Flame and chemical retardant upper and sole rubbers.
Penetration resistant midsole and steel toe cap.
Removable PU innersole for comfort, fully lined with Kevlar®/Nomex® lining.
Certified to the highest protection level within the
AS/NZS 4821:2006 standard for Firefighters' footwear and approved against the AS/NZS 2210.3:2000 standard for Safety footwear.
Sizing: 4-14 Base your size on 1 smaller than your TAIPAN BOOTS
Codes: FSF704 - FSF714
Standard: AS/NZS 4821:2006, AS/NZS 2210.3:2000
Skellerup structural fire fighting boots must, pass very critical requirements such as:
• Survive conductive heat resistance @ 2500 C for 4 mins
• Survive radiant heat resistance @ 2W/cm2 for 4 mins
• Survive flame resistance for 15 secs
• Provide insulation properties @ 1500 C for 4 mins
• Provide outer sole resistance to hot contact @ 3000 C for 60secs
• Ensure protection via a Steel Toe Cap that can withstand a 200 Joule impact
The manufacturing process used to construct Skellerup professional fire fighting boots is independently audited by SAI
Global and products are also independently tested to comply with the Protective footwear for fire fighters AS/NZS 4821 Standard.
Only those boots that all of the compliance requirements will get the 5 ticks mark.
Source SAI Global Limited - Case Study
