Current Category Scotty Fire ** NEW **

	Revolver Nozzle Scotty Revolver variable grass and scrub nozzle. The Scotty 4044 "Revolver" Nozzle is the answer for the need of a multi-aperature, low flow nozzle water saving nozzle. Easy to drag with minimal snag. The 4044 can be set on one of four different flow rates, three in a straight stream mode and one in a slot/fan pattern with pre-set flow rates are 12, 24, 36 and 48 LPM. A great inexpensive functional branch. perfect for slip ons or limited water source applications.		Price:

	Scotty Mini Monitor The Scotty 4049 is a "Mini Monitor" system that can be permanently or temporarily mounted virtually anywhere. The system consists of mounting plate, a removable pedestal base with a mounted stainless steel swivel tube, a threaded tube bracket, a 4080 Pistol Grip Shut-Off and either a Foam Tube Nozzle, a Fog/Stream Nozzle or a Smooth Bore Nozzle. The unit will swivel 360º and tilt up to 75º above and down to 45º below the horizontal. The unit can be locked in one of seven different angles by tightening the included knob lock.		Price:

	Scotty 4072 Min " Around the pump" Foam Eductor / Mixer Kit The 4072 was developed for mounting on smaller portable water pumps.  Like the larger 4071, the unit is mounted between the discharge and suction side of a pump.  The 4072Kit comes with two 1.5” NPSH cast aluminum swivel Tee’s. The unit is calibrated for preset eduction ratios with settings of : OFF - .2 - .5 - .7 and 1%. The 4072 is available for flow rates of 30 (140Lts),  50 (225Lts) and 70 (315Lts) gallons per minute. Please specify when ordering.		Price:

	Scotty 4071 " Around the pump" Foam Eductor / Mixer Kit The 4071 Foam Eductor/Mixer is a simple “A-theP” unit to educt foam concentrate into hose lines.  It is Mounted between the discharge and suction side of a pump.  For use on portable pumps or fitted permanently to slip-ons or mop up units. The 4071 is a simple and effective way for fire Brigades to add a foam capability to their equipment.		Price:

	Scotty 4045-30 Roll and Foam mobile foam attack sysytem The Scotty 4045-30, "Roll & Foam", Mobile Foam Attack System is a self-contained The unit that can transform any pressurized fire hose, water supply line or stand pipe into a fire fighting foam generating station. Just roll the unit to a pressurized water source near a fire scene even when the tank is filled to capacity with fire fighting foam concentrate (foam concentrate not included). The unit can be reday to deploy, set-up and spray foam in under a minute.		Price:

	Scotty 4039-15 Foam Factory The Scotty 4039-15FFA "Foam Factory" is a system that can transform any pressurized fire hose or water supply line into a stand alone fire foam generating station. A fire crew can arrive at an incident where a quick layer of foam is required, a spill or haz-mat situation, attach a supply hose, place it where the foam is needed and adjust the water flow for the desired foam.		Price:

	Scotty 4010 50 fast Foam Applicator The Scotty 4010-50 Foam-Fast is a foam applicator made with the firefighter in mind.  This higher flow unit is designed to be attached to 1-1/2" hose lines.  The 4010-50 will flow water at a rate of 50gpm (190 Lt./m) when attached to a standard 1.5" fire hose line.  The 4010-50 is recommended for use with water pressures between 75psi and 125psi (maximum 150psi).		Price:

	Scotty 4010 3 fast Foam Applicator The Scotty 4010-3 is the most simple and effective method of deploying a foam surfactant/wetting agent onto a fire scene from a 3/4" garden hose. Fire Fighters use foam surfactants in their water to lower the water's surface tension, allowing it to spread and penetrate much more easily. To operate, simply open the inlet side of the mixing chamber, insert a foam cartridge, reseal the inlet end cap, attach to a 3/4" garden hose and spray foam.		Price:

	Scotty 200lpm Fire Fighting Foam Kit The Scotty Five Litre Foam Kit, 4075-50, is designed for attachment to a 25 or 38mm fire hose.  The unit provides a fast and simple solution to a fire scene where a requirement exists to combat fire with Class A or Class B (AFFF) foam.		Price:

	Scotty 32lpm Fire Fighting Foam Kit Low Flow the 4075-32 is perfect for 19mmm Hose run from tankers or slip-ons.  Due to the lower flow rate the unit can be attached to any small pump or pressurized water source perfect in rural and urban environments. The unit can be adapted for use with many liquid products requiring a eduction delivery system. Both the 12 and 32 LPM units will operate with a pressure of 45 PSI or more. An ideal tool in grassland fire situations.		Price:

	Scotty 12lpm Fire Fighting Foam Kit Home based / Low Flow the 4075-3 has similar applications as the 4075-8.  Due to the lower flow rate the unit can be attached to a standard home garden hose and can be used in rural and urban environments. The unit can be adapted for use with many liquid products requiring a eduction delivery system. Both the 12 and 32 LPM units will operate with a pressure of 45 PSI or more.		Price: