|
|
|
Current Category Boots & Footwear

|
Skellerup Fire Officer Level 3 Boot - Canvas Lined
Skellerup - Fire Officer Hand-built rubber Firefighting boot. Flame and chemical retardant upper and sole rubbers. Penetration resistant midsole and steel toe cap. Removable PU innersole for comfort, fully lined with Canvas lining. Certified to the highest protection level within the AS/NZS 4821:2006 standard for Firefighters' footwear and approved against the AS/NZS 2210.3:2000 standard for Safety footwear.
Sizing: 4-14 Codes: FSF704 - FSF714 Standard: AS/NZS 4821:2006, AS/NZS 2210.3:2000
|
|
Price:
|
|

|
Skellerup Fire Chief Level 3 Boot - Kevlar Lined
Skellerup - Fire Chief Hand-built rubber Firefighting boot. Flame and chemical retardant upper and sole rubbers. Penetration resistant midsole and steel toe cap. Removable PU innersole for comfort, fully lined with Kevlar®/Nomex® lining. Certified to the highest protection level within the AS/NZS 4821:2006 standard for Firefighters' footwear and approved against the AS/NZS 2210.3:2000 standard for Safety footwear.
Sizing: 4-14 Codes: FSF704 - FSF714 Standard: AS/NZS 4821:2006, AS/NZS 2210.3:2000
|
|
Price:
|
|

|
Taipan 5072 - ESB Emergency Boot - Structual Fire, Steel Cap USED CAT2 Very few left- min sizes
USED Cat2 - Good to OK condtion. Most Sizes available - They are NOT new and are used, In overall good condtion, will suit Fire Ground Operations, but have marks, scuffs and scartches All soles good and intact Cleaned, Tested, Taipan Footwear specialty is the Taipan Fire Boot range. Taipan Footwear was the first company in Australia to start manufacturing fire boots to the new AS/NZ 4821 standard and the NFPA worldwide standard. The Taipan range of fire boots can really take the heat. The Density Rubber soling system is shock absorbent, hard wearing and is heat resistant to 300 degrees. When you work for the Emergency Services you need to be able to depend on your equipment. Steel Toe Cap
|
|
Price:
|
SOLD OUT

|
|

|
Taipan 5072 - ESB Emergency Boot - Structual Fire, Steel Cap USED CAT1
USED Cat1 - Very good to good condtion. In overall good condtion, will suit Fire Ground Operations, but have some marks and scuffs. Cleaned, Tested, Polished Taipan Footwear specialty is the Taipan Fire Boot range. Taipan Footwear was the first company in Australia to start manufacturing fire boots to the new AS/NZ 4821 standard and the NFPA worldwide standard. The Taipan range of fire boots can really take the heat. The Density Rubber soling system is shock absorbent, hard wearing and is heat resistant to 300 degrees. When you work for the Emergency Services you need to be able to depend on your equipment. Steel Toe Cap
|
|
Price:
|
|

|
Taipan 5072 - ESB Emergency Services Boot - Structual Fire, Steel Cap
Taipan Footwear specialty is the Taipan Fire Boot range. Taipan Footwear was the first company in Australia to start manufacturing fire boots to the new AS/NZ 4821 standard and the NFPA worldwide standard. The Taipan range of fire boots can really take the heat. The Density Rubber soling system is shock absorbent, hard wearing and is heat resistant to 300 degrees. When you work for the Emergency Services you need to be able to depend on your equipment. Steel Toe Cap
|
|
Price:
|
|

|
Taipan 5071 - Wildland High Leg Boot - Fire
Taipan Footwear specialty is the Taipan Fire Boot range. Taipan Footwear was the first company in Australia to start manufacturing fire boots to the new AS/NZ 4821 standard and the NFPA worldwide standard. The Taipan range of fire boots can really take the heat. The Density Rubber soling system is shock absorbent, hard wearing and is heat resistant to 300 degrees. When you work for the Emergency Services you need to be able to depend on your equipment.
|
|
Price:
|
|

|
Taipan 5078 - ESB Emergency Services Boot - Wildland medium fire, Soft toe
Taipan Footwear specialty is the Taipan Fire Boot range. Taipan Footwear was the first company in Australia to start manufacturing fire boots to the new AS/NZ 4821 standard and the NFPA worldwide standard. The Taipan range of fire boots can really take the heat. The Density Rubber soling system is shock absorbent, hard wearing and is heat resistant to 300 degrees. When you work for the Emergency Services you need to be able to depend on your equipment. Soft Toe Boot
|
|
Price:
|
|

|
Taipan 5074 - ESB Emergency Services Boot - Low Cut Fire
Taipan Footwear specialty is the Taipan Fire Boot range. Taipan Footwear was the first company in Australia to start manufacturing fire boots to the new AS/NZ 4821 standard and the NFPA worldwide standard. The Taipan range of fire boots can really take the heat. The Density Rubber soling system is shock absorbent, hard wearing and is heat resistant to 300 degrees. When you work for the Emergency Services you need to be able to depend on your equipment. Low Cut Wild fire boot
|
|
Price:
|
|

|
Air Boss - Fireman Structural Boot
A heat-resistant and flexible hand-layered rubber construction fire boot. Special compound prevent ozone deterioration and a shaped top for tibia protection and easy entry. Padded ankle bone protection patch. Pull on opening for quick entry and easy taking off. Additional protection of the tibia and the metatarsal bones for optimum comfort when working on ladders.
|
|
Price:
|
|

|
Skellerup Fire boots - The Original !
D Handle pull up, Steel toe cap, Heavy duty tread, not the lined slippery style, As prevoiusly issued by CFA Only selected sizes, Chemical resistant, A little more comfortable then level 2 boots when standing in puddles of water up to your shins in winter !!!
|
|
Price:
|
|
Fire Trader Australia Pty Ltd Copyright 2005
|
|