|
Current Category Gloves
Gloves
|
Fire Trader Glove Gripper with S-Biner connector
Sick of Wet Gloves ? No room in your pockets ? Not sure where your gloves are ?
Use a Fire Trader Glove Gripper ! No change or modification to your turnout gear !
Heavy Duty HEAT RESISTANT velcro, The same thats on your PPE PPC
3M Scotchlite reflective material banding, D-clip double sewn, your choice of colours,
Comes with a # 1 S-Biner, weight loaded 2.KG great for keys and torch
Great place to put the 003 Key as well !
RED - BLUE - YELLOW
Large Glove Grip Photo
|
|
Price:
|
|
|
Fire Trader Glove Gripper
Sick of Wet Gloves ? No room in your pockets ? Not sure where your gloves are ?
Use a Fire Trader Glove Gripper ! No change or modification to your turnout gear !
Heavy Duty HEAT RESISTANT velcro, The same thats on your PPE PPC
3M Scotchlite reflective material banding, D-clip double sewn, your choice of colours,
Comes with a non weight bearing carabiner, great place to put the 003 Key as well !
RED - BLUE - YELLOW
Large Glove Grip Photo
|
|
Price:
|
|
|
Fire Walker WCU Level 1 - Wildfire Glove with Wool Cuff
Fire Walker Level 1 Wildfire Glove with Wool Cuff
Water repellant A Grade 1.8mm leather outer, Rigger style with inset thumb design,
Kevlar knit cuff, Kevlar stitching, Internal wool lining on the back of the hand, Extremely comfortable fit,
Excellent dexterity, Elastic gathered back, Cost effective, Generous 35cm length,
3M 8940 reflective tape on abck of hand
Sizes XS-XXL.
|
|
Price:
|
|
|
Extraction Rescue Glove
Extraction Rescue Gloves
N8080 grip enhanced palm using CLARINO Posi-Stop material.
Highly liquid resistant material, Spandex breathable back, Comfort fitted wrist,
Excellent dexterity, Low replacement cost
Sizes XS-XXL,
NOTE - These gloves NOT Fire retardant.
|
|
Price:
|
|
|
Rope Rescue Glove
Rope Rescue Gloves
Soft leather palm with Viscolac energy absorbing padding,
Excellent friction protection, Spandex breathable back,
Comfort fitted wrist, Excellent dexterity,
Low replacement cost,
Sizes XS-XXL,
NOTE - These gloves NOT Fire retardant.
|
|
Price:
|
|
|
Structural Firewall - Level 2 with moisture barrier Gloves
Pacfiic - Firewall Level 2.
Water repellent A Grade leather outer, rigger style with inset thumb design, Kevlar knit cuff, stiching and full hand internal liner,
Moisture barrier, Extremely comfortable, Excellent dexterity,
Sizes XS-XXL - Generous 35cm length
|
|
Price:
|
|
|
Structural Firewall - Level 3 Gloves
Pacfiic - Firewall Level 3.
Hi Vis lime-yellow with 3M reflective strip on back of hand,
Rigger style design, Reinforced palm & thumb leather strip,
Kevlar knit cuff with leather wear protector,
Porelle breathable moisture barrier , Kevlar thermal liner
Extremely comfortable, Excellent dexterity,
Sizes XS-XXL
|
|
Price:
|
|
|
Jupiter Structural - Level 2 Kermel Gloves
Kermal Jupiter - Level 2 Fire Glove.
Impregnated Kevlar outer palm from the fingertips to the cuff base, Ideal for people allergic to leather,
The glove has a CROSSTECH Direct Grip moisture barrier, CROSSTECH Direct Grip is permanently attached to the inner thermal liner,
Provided protection against heat & flame and also provides protection against cold,
Resistant to puncture and laceration and also Oil and Gas,
A heat and shock absorber is intergrtaed into the knuckle area of the upper hand. The PHA Jupiter 2 is 100% matched to the hand by virtue of its ergonomic 3 dimensional cut,
Washable at 60 degrees C, Capable of up to 20 washes,
Sizes XS-XXL
|
|
Price:
|
|
|
Super Mars - Level 3 Gloves
SUPER MARS 3 - Structual Fire Fighting Glove - Level 3
Special waterproof non-flammable, non-shrinking, oil & water repellent, acid resistant leather,
Crosstech chemical protection membrane from the finger tips to the end of the cuff which is 100% permanently attached by means of ESKA patented processing
Knuckle protection pad, Super Mars 3 from PHA is waterproof with a blood bourne pathogen protection barrier, Active-breathing, optimum heat and cold protection,
The three-dimensional ergomomic cut provides high tactille sensitivity and makes this PHA product a constant companion in the entire range of fire fighting activities
Extended service life - Also suitable for technical applications,
Antislip, impact and wear resistant, Extra grip palm, Camel colour to minimise heat absorption,
Ideal for Live Fire Training, Top of the range glove,
Washable to 40 degree C, Capable of up to 20 washes,
Sizes XS-XXL
|
|
Price:
|
|
|
Fire Fighter Gloves - American Firewear 7500 Level 3
American Firewear manufactures a wide variety of personal protective clothing and accessories, predominantly for fire fighters and rescue workers.
American Firewear’s innovative designs and concepts are acknowledged around the world.
- Polyurethan moisture barrier meets all NFPA liquid, chemical, and bloodborne pathogen penetration requirements
- Barrier and SEF Modacrylic thermal lining are permanently bonded, then sewn to the glove shell
|
|
Price:
|
|
|
Fire Fighter Gloves - X2 Long Cuff
The glove is specifically designed and constructed for structural firefighting activities.
It is manufactured of material designed to withstand the effects of flame, heat, vapor, hazardous liquids, sharp objects and other hazards that are encountered during structural firefighting operations.
Available in small only.
|
|
Price:
|
|
Fire Trader Australia Pty Ltd Copyright 2005
|
